D100 100MM ROUND KNIFE RASOR CUTTER 220V
Rasor D100
100mm Electric Bench Cutters
For over 40 years within the market, the model D100 is the most efficient and popular bench cutting machine in textile application. It weighs less than 3 kilos and reached the highest level in technology and safety resulting a powerful and easy-handling cutting machine. It finds Wide application in textile field. It is especially suitable to cut natural fiber as cotton, wool or silk. The half-automatic sharpening stone system to be operated by a proper lever allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife. The aluminium base with rolls is Teflon® coated to be friction proof and to grant an easy feed with no efforts. The low maintenance and low operation cost make surely this model the best cutting machine for any application in textile field.
Description
The Rasor D100, bench cutter model, is used in order to quickly cut fabrics in the textile industry and other materials. It is extremely versatile and powerful, it requires little maintenance and has a very low management costs. Thanks to the use of two stones to sharpen the blade, a sliding foot and an effective cutting system with a circular blade, the bench cutter can cut different materials, such as natural fibers, cotton, linen, silk and woolen yarn.
The small dimensions of the blade (100mm) and the light-weight (only 3000g) of the cutter, mades it ideally suited for small radius cut profiles on materials with a thickness up to 3.5cm. The wide sliding bearing base allows the operator to slide the cutter on the table without effort. A Sharpener assembled on the cutter heads allows whetting the blade at any moment without disassembling it. After carrying out this operation, it is possible to start cutting again.
Acoustic Level
The maximum sound pressure level emitted is approximately 60 dB (A). Airborne noise was detected in compliance with EN ISO 15744:2008. The noise levels emitted by the device at various detection distances (with no soundwave filtration system) vary by a few db (A).
Technical Specification
| Model | Rasor D100 |
|---|---|
| 100mm Electric Bench Cutters | |
| Blade Diameter | 100 mm (4″) |
| Blades Description | 10CEXTG, circular, EXTRA steel |
| Blades Speed | 1000 rpm |
| Cutting ability | 35 mm (1.4″) |
| Power | singlephase – 90 W |
| Max absorption | 2 A, with protection fuse |
| Net weight (with power supply cord) | 2950 g |
| Total weight (with packaging) | 4650 g |
| Electric cable length | 1.5 mt (with no plug) |
| Minimum brightness for working operations | 200 LUX |
| Vibrations at start up | < 2.5 m/sec 2 |
| Temperature range | 0 – 55 C |
| Humidity range | 10 – 95% without condensate |
| Part No | TAD100 |
|---|---|
| Weight (KG) | 4.000000 |
| Manufacturer | Rasor |
